Rate sensitivity and deformation mechanism of semi-crystalline polymers during instrumented indentation

Instrumented indentation tests using both constant loading rate (CLR) and continuous stiffness measurement (CSM) operation modes were performed to investigate the deformation mechanism and their sensitivity to the deformation rate in semi-crystalline polymers through the quantitative analysis of load-depth loading and unloading curves. The strain rate was constant during the CSM tests, while the strain rate decreased with the increasing of loading time in CLR tests. The mechanical response mechanism of the semi-crystalline polymers to these tests was very complicated because of the combined effects of strain-hardening in the crystal phase and strain-softening in the amorphous phase. Results show that the loading index m reflects the strain-hardening or strain-softening response during indentation. When m > 2, the mechanical response was due to the strain-hardening, and when m < 2, the response was due to strain-softening. A method based on the measured contact hardness was proposed to obtain the unloading stiffness, and the other mechanical parameters could then be determined according to the unloading stiffness.     

On the split common fixed point problem for strict quasi-ϕ-pseudocontractive mappings in Banach spaces

Numerical Algorithms - The purpose of this paper is to propose an algorithm for solving the split common fixed point problem for strict quasi-?-pseudocontractive mappings in Banach spaces. It...     

Effective suppression of beta oscillation in Parkinsonian state via a noisy direct delayed feedback control scheme

This work explores the function of the noisy direct delayed feedback(NDDF)control strategy in suppressing the pathological oscillations in the basal ganglia(BG)with Parkinson’s disease(PD).Deep brain stimulation(DBS)alleviates the PD state fantastically.However,due to its unclear mechanism and open-loop characteristic,it is challenging to further improve its effects with lower energy expenditure.The noise stimulus performs competitively in alleviating the PD state theoretically,but it cannot adapt to the neural condition timely and automatically due to its open-loop control scheme.The direct delayed feedback(DDF)control strategy is able to disturb excessive synchronous effectively.Therefore,the NDDF control strategy is proposed and researched based on a BG computational model,which can reflect the intrinsic properties of the BG neurons and their connections with thalamic neurons.Simulation results show that the NDDF control strategy with optimal parameters is effective in removing the pathological beta oscillations.By comparison,we find the NDDF control strategy performs more excellent than DDF in alleviating PD state.Additionally,we define the multiple-NDDF control strategy and find that the multiple-NDDF with appropriate parameters performs better than NDDF.The obtained results contribute to the cure for PD symptoms by optimizing the noise-induced improvement of the BG dysfunction.     

Machine learning-based rock characterisation models for rotary-percussive drilling

Nonlinear Dynamics - Vibro-impact drilling has shown huge potential of delivering better rate of penetration, improved tools lifespan and better borehole stability. However, being resonantly...     

The extremal irregularity of connected graphs with given number of pendant vertices

Czechoslovak Mathematical Journal - The irregularity of a graph G = (V, E) is defined as the sum of imbalances ∣du ? dv∣ over all edges uv ∈ E, where du denotes the degree...     

How do molecular interactions affect fluorescence behavior of AIEgens in solution and aggregate states?

Molecular interactions are crucial in diverse fields of protein folding,material science,nanotechnology,and life origins.Although mounting experimental research controls luminescent behavior by adjusting molecular interactions in light-emitting materials,it remains elusive to correlate microscopic molecular interactions with macroscopic luminescent behavior directly.Here,we synthesized three red luminogens with subtle structural variation and investigated the influence of molecular interactions on their luminescent behavior in solution and aggregate states.Our results indicate that strongπ-πand D-A interactions in both dilute solution(between luminogen and solvent molecules)and aggregate(between luminogens)states cause the redshift in emission,while weak interactions(e.g.,Van der Waals,C–H…π,and C–H…F interactions)enhance the quantum yield.This work provides a thoughtful investigation into the complicated influence of various molecular interactions on luminescent behavior.     

改进的PNC方法及其在非线性偏微分方程多解问题中的应用

2017年，李昭祥等提出了一种偏牛顿-校正法（Partial Newton-Correction Method，简记为PNC方法），并利用它成功地计算出了三类非线性偏微分方程的多重不稳定解.本文在PNC方法的基础上，提出并发展了一种改进的PNC方法.首先，利用Nehari流形$\mathcal{N}$与零平凡解的可分离性，建立并证明了$\mathcal{N}$的某特殊子流形$\mathcal{M}$上的全局分离定理及其推广（即局部分离定理）.全局分离定理只跟非线性偏微分算子或相应的非线性泛函本身有关，而与具体的计算方法无关.对一些典型的非线性偏微分方程多解问题（比如，Henon方程问题），该全局分离定理的分离条件，经验证是成立的.另一个方面，通过修改或补充原辅助变换的定义，去掉了原辅助变换的奇异性；接着建立并证明了某些非线性偏微分方程问题的新未知解与该非线性偏微分算子零核空间的密切关系；在证明中，去掉了在原奇异变换下所需的标准收敛（standard convergence）假设.最后，计算实例与数值结果验证了改进的PNC方法的可行性和有效性；同时表明子流形$\mathcal{M}$与已知解的可分离性是PNC方法和本文新方法能成功找到多解的关键.     

One-step method for synthesis of bio-based semi-aromatic high-temperature polyamide PA5T/56 and its non-isothermal crystallization kinetics

Journal of Thermal Analysis and Calorimetry - The bio-based semi-aromatic high-temperature polyamide PA5T/56 was successfully synthesized by one-step method, which shortened the reaction time...     

Pit volume estimation on the stainless steel according to single current transient

Journal of Solid State Electrochemistry - The maximum pit volume is a significant parameter to evaluate the pitting extent on metal materials, which could be associated with the charge transfer...     

Preparation of C30 concrete and its adsorption performance for Cs(I)

Journal of Radioanalytical and Nuclear Chemistry - The preparation of C30 concrete for a cavernous waste repository under construction in China and its Cs(I) adsorption performance were...